Non-wax, non-silicone cleaning cream for pre-spray removal of static and film residue. Apply around repair zone prior to spraying to remove grease, film, finger prints and static from surfaces. Promotes a uniform finish! Will make a difference on repairs intended to blend and burn down overspray especially on Quick Glaze and K2000 spot spray.
IMPORTANT*
 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov. |
Multi-Tech Products
Our Standard Quick Glaze Finishing Solvent. Eliminates dry halo rings, melts in overspray and contro…
Multi-Tech Products
Our Toner Kits come in 3 different variations . . . Complete Kit, Primary Kit and Secondary Kit. &nb…
Accelerate the rate of the cure and the rate of the reducer evaporation with 32:1 of this added to y…
Multi-Tech Products
Quick Glaze separate toner colors consist of Brown/Black, Blue/Black, Yellow Oxide, Chrome Yellow, R…
Multi-Tech Products
Adjusts viscosity of Quick Glaze Basecoat & Clear Topcoat only. Low Temp Reducer for 70 F Degree…
