12 oz High Gloss Clear Overcoat
Our high gloss clear overcoat is designed to provide a durable, protective finish that enhances the longevity and appearance of your refinished surfaces. This product is used in conjunction with our colored aerosols to give a high-gloss, professional-grade finish to a variety of surfaces.
Description
The High Gloss Clear Overcoat is ideal for providing a protective layer over refinished surfaces. This clear coating ensures a high-gloss, durable finish that protects against moisture, high humidity, and ease of cleaning. It is perfect for use on bathtubs, sinks, toilets, shower stalls, stove tops, washers, dryers, refrigerators, outdoor furniture, and more. This product is compatible with surfaces such as cast iron, enameled steel, vitreous china, porcelain, gel-coated fiberglass, acrylic, and plastics. The applications are endless!
Other Applications:
Utility and golf carts, handrails and grab bars, air conditioning grills, parts refinishing, metal doors and window frames, cabinet doors, office furniture, file cabinets, and more. Great for pool, spa, sauna, utility and pump areas, basement, kitchen, yard, and other products exposed to the elements.
Application Highlights and Recommendations:
- Sprays smooth with little orange peel and nice gloss.
- Clean the surface first with a pre-cleaner and wipe with a tack cloth for optimum spray-out results and a dust-free finish.
- Spraying product at 76 degrees ambient work temperature will give excellent spray-out results.
- Don’t spray where a heater or fan is blowing on the spray area. This will dry the coating before it lays to the surface causing roughness to the finish.
- Bonds to acrylic, fiberglass, gel coat, and plastics with long-term adhesion, especially when the surface is sanded first with 320 grit sandpaper or with a Scotch-Brite pad.
- Product is high in solids and will cover generally in two coats. Allow the first light coat to become tacky (wait 5 minutes) before applying the heavier final finish coat.
- Understand that shaking the can for a full minute will assure the best coverage and results.
- Remove the gloss first from enamel, ceramic, and porcelain finishes with our etching cream for best adhesion.
- Mask off the areas that you do not want over-spray or product on like the tile edge fixtures and floor.
- Wear the recommended respirator when poor ventilation is apparent.
- Wet coating can be cleaned up with lacquer thinner or isopropyl alcohol. Be sure to wear protective latex gloves.
- Longevity and adhesion will be extended by allowing the new coating to cure for 48 hours before putting it back into use in a wet or humid environment.
Safety Data Sheets:
SDS High Gloss Clear Overcoat Spray
WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov