Professional Repair System – Almond/Bone

Name: PROFESSIONAL REPAIR SYSTEM ALMOND BONE
SKU: 81041
Availability: InStock

Aerosol Repair or Refinish Kit. For acrylic, fiberglass, porcelain, or steel. This ceramic-hard coating is designed for refinishing bathtubs, sinks, toilets, shower stalls, appliances, outdoor furniture, metal parts, and more. This kit comes equipped with ample materials to repair 10-12 average chips or small cracks on most surfaces. When a complete refinish is desired, as on a standard bathtub, a separate spray color is available.

Description

Surface Repair Refinishing Spray is ideal for the toughest refinishing jobs. This porcelain-hard refinish coating cures and becomes hard like no other paint and is long-lasting, durable, with a high gloss finish that is easily maintained. Use it for refinishing bathtubs, sinks, toilets, shower stalls, stove tops, washers, dryers, refrigerators, outdoor furniture, and more. This product can also be used on cast iron, enameled steel, vitreous china, porcelain, gel-coated fiberglass, acrylic, and plastics. This ceramic-like product is the ultimate for applications where water moisture, high humidity, and ease of cleaning are a concern. The applications are endless!

Our aerosols are factory-matched to the most popular manufacturers of bathware, ensuring a perfect color match and seamless repairs. Among some of the major manufacturers included are American Whirlpool, Aquarius, Aquatic Industries, Clark, Clarion, Hydro Systems, Jason, Kohler, Lasco, Laurel Mountain, Mirolin, MTI, Proflo, Oasis, Sterling Vikrell, and Royal Bath.

Available Colors:

Appliance White
Plumbing White
Biscuit/Linen
Almond/Bone

Kit Contents:

Poly Filler
Hardener for Filler
Stir sticks
100, 220, and 320 grit Sand Paper
12 oz Aerosol

Application Highlights and Recommendations:

Sprays smooth with little orange peel and nice gloss.
A clear coat is available for surfaces that do not need color or to extend the use of the color coat application.
Clean the surface first with a pre-cleaner and wipe with a tack cloth for optimum spray-out results and a dust-free finish.
Spraying product at 76 degrees ambient work temperature will give excellent spray-out results.
Don’t spray where a heater or fan is blowing on the spray area. This will dry the coating before it lays to the surface causing roughness to the finish.
Bonds to acrylic, fiberglass, gel coat, and plastics with long-term adhesion, especially when the surface is sanded first with 320 grit sandpaper or with a Scotch-Brite pad.
Product is high in solids and will cover generally in two coats. Allow the first light coat to become tacky (wait 5 minutes) before applying the heavier final finish coat.
Understand that shaking the can for a full minute will assure the best coverage and results.
Remove the gloss first from enamel, ceramic, and porcelain finishes with our etching cream for best adhesion.
Mask off the areas that you do not want over-spray or product on like the tile edge fixtures and floor.
Wear the recommended respirator when poor ventilation is apparent.
Wet coating can be cleaned up with lacquer thinner or isopropyl alcohol. Be sure to wear protective latex gloves.
Longevity and adhesion will be extended by allowing the new coating to cure for 48 hours before putting it back into use in a wet or humid environment.